Featured

  • Personlized Products Intumescent Mastic Sealant - Consealed drop down seal GF-B05 – Gallford

    GF-B05 Consealed drop down seal, four-bar linkage mechanism, suitable for doors with slots in the door leaf. When installing, there must be a 20mm*12mm through slot at the bottom of the door. Place the product in it, and fix the cover plate and the sealer at both ends with screws (or fix them upward from the bottom of the sealing strip). The use of this product does not affect the overall door style. • Length:260mm-1500mm • Sealing gap:3mm-15mm • Finish:Anodized silver • Fixing:With pre-...
  • 18 Years Factory Md Under Door Seal - Fire grille – Gallford

    • Fire grille is designed for fireproof doors , it can meets the demand of ventilation in daily life and provide and excellent fire protection through rapid expansion by itself in a fire,thereby prevent passing fire and hot gases. • Suitable for fire resisting doorsets & compartment walls for up to 60 minute fire resistance. • Fire grille size: Minimum unit is 150mm*150mm, Horizontal and vertical overlapping, thickness 40mm . standard set is 1 grille+2 face plate
  • Factory best selling Curved Shower Door Bottom Seal - Fire Rated Drop Down Seal GF-B09 – Gallford

    Tested by European standard BS/EN-1634 for 2 hours Consealed drop down seal, four-bar linkage mechanism, suitable for doors with slots in the door leaf. During installation, there is a 34mm*14mm through slot at the bottom of the door. Place the product in it, and fix the cover and sealer at both ends with screws (or use screws to fix up from the bottom of the sealing strip). The use of this product does not affect the overall door style. • Length:380mm-1800mm • Sealing gap:3mm-15mm • Finish...
  • Rapid Delivery for Intumescent Acrylic Sealant - Fire rated drop down seal GF-B09 – Gallford

    Tested by European standard BS EN-1634 for 1/2 hours GF-B09 Consealed drop down seal, four-bar linkage mechanism, suitable for doors with slots in the door leaf. During installation, there is a 34mm*14mm through slot at the bottom of the door. Place the product in it, and fix the cover and sealer at both ends with screws (or use screws to fix up from the bottom of the sealing strip). The use of this product does not affect the overall door style. • Length:380mm-1800mm • Sealing gap:3mm...
  • 2021 Good Quality Shower Door Seal Strip - Fire sheet – Gallford

    •  Made by intumescent material, Expansion rate with 5 times, 15times and up to 25 times.  •  Max.width 640mm, standard thickness 1mm,1.5mm and 2mm. •  Suitable for inner lining of fire door panels, filling cabinets and storage boxes, and electrical boxes. •  With or without adhesive tape.  Part Number Width(mm) Thickness(mm) Expansion Ratio Length(coil)  FS64002  640  2  30、15、5 100m&Customized  FS64015  640  1.5  30、15、5 100m&Customized  FS64001  640  1  30、15、5 1...
  • 2021 New Style Magnetic Door Seal Replacement - Fire sheet – Gallford

    •  Made by intumescent material, Expansion rate with 5 times, 15times and up to 25 times.  •  Max.width 640mm, standard thickness 1mm,1.5mm and 2mm. •  Suitable for inner lining of fire door panels, filling cabinets and storage boxes, and electrical boxes. •  With or without adhesive tape.  Part Number Width(mm) Thickness(mm) Expansion Ratio Length(coil)  FS64002  640  2  30、15、5 100m&Customized  FS64015  640  1.5  30、15、5 100m&Customized  FS64001  640  1  30、15、5 1...
  • Leading Manufacturer for Mohair Door Seal - Fire glazing seal system – Gallford

    60 minutes fire glazing seal system •Three parts system, consists 2 glazing seals + 1 aperture liner. •Suitable for different thickness glass. •The integral fins adjust good tolerance and give sufficient compression for glass. 30 minutes fire glazing seal system •30 minutes fire galzing seal is designed for 30′ glazing system, it is range of U channel strip. •Suitable for glazed door , patitions and screem. •Mainly used for 6mm wired glass. •Easy installation with wrap around glass.
  • 2021 New Style Magnetic Door Seal Replacement - Fire lock kit & Hinge pad – Gallford

    •  Made by intumescent material, Expansion rate with 5 times, 15times and up to 25 times. •  Thickness with 1mm, 1.5mm and 2mm. •  Die cutting of pads for lock kit and hinge pad , door closers etc. •  With or without adhesive tape.
  • Leading Manufacturer for Mohair Door Seal - Special fire seal – Gallford

    Property • Intumescent material covered with extinguished rubber seals • Double fuction with fire & weather seal both, good performance of cushion and sealing • Easy application, suitable for fitting to rebates in wooden door /steel door leaf or frame • Customized by customer’s requirement
  • Factory Price Md Door Seal - Flexible fire seal – Gallford

    Property • Intumescent material covered with flexible PVC skin which enhances appearance and is available in different colours • Cutting from 650mm fire sheet, can be varies width of seal, 1mm, 1.5mm and 2mm thickness available • Co-extrusion seal also available Part Number  Profile Size(mm)  Packing(carton) RM0706 7×6 100m/coil RM0802 8×2 100m/coil RM1002 10×2 100m/coil RM1004 10×4 100m/coil RM1302 13×2 100m/coil RM1502 15×2 100m/coil RM1802 18&...
  • Cheap price Roller Door Rubber Seal - Fire glazing seal system – Gallford

    60 minutes fire glazing seal system •Three parts system, consists 2 glazing seals + 1 aperture liner. •Suitable for different thickness glass. •The integral fins adjust good tolerance and give sufficient compression for glass. 30 minutes fire glazing seal system •30 minutes fire galzing seal is designed for 30′ glazing system, it is range of U channel strip. •Suitable for glazed door , patitions and screem. •Mainly used for 6mm wired glass. •Easy installation with wrap around glass.
  • OEM/ODM China Back Door Seal - Fire grille – Gallford

    • Fire grille is designed for fireproof doors , it can meets the demand of ventilation in daily life and provide and excellent fire protection through rapid expansion by itself in a fire,thereby prevent passing fire and hot gases. • Suitable for fire resisting doorsets & compartment walls for up to 60 minute fire resistance. • Fire grille size: Minimum unit is 150mm*150mm, Horizontal and vertical overlapping, thickness 40mm . standard set is 1 grille+2 face plate